Moe Posted December 3, 2009 Report Share Posted December 3, 2009 I know that everyone has their favorite stuff they use for rust prevention on their firearms. 1. I use LPS#2 95% of the time, LPS#3 for long term storage.2. Sometimes I use Rem oil in the field because it comes in a small 4oz can.3. On my Remington 1100, I use Breakfree CLP both inside and out. CLP keeps it running the longest with less residue. Quote Link to comment Share on other sites More sharing options...
rugerman1 Posted December 3, 2009 Report Share Posted December 3, 2009 Car wax on the outside,Eezox on the inside.Purple Problem Solver was my old favorite gun chemical.I wish the inventor would start production back up again! Quote Link to comment Share on other sites More sharing options...
wwillson Posted December 3, 2009 Report Share Posted December 3, 2009 I have a couple guns that I won't shoot and are in 'long term' storage in my safe. I coated the bore with ALOX, which is a commercial rust inhibitor (and works really well as a tumble lube). For the rest of my guns, I use a light gun oil or Rem Oil.The most important piece of the no rust puzzle is the dehumidifier in my gun safe.Wayne Quote Link to comment Share on other sites More sharing options...
Scotty Posted December 3, 2009 Report Share Posted December 3, 2009 CLP on the inside, WD-40 outside. Quote Link to comment Share on other sites More sharing options...
dnewton3 Posted April 19, 2010 Report Share Posted April 19, 2010 I, too, use WD 40 or similar product for storage; corrosion prevention is my primary concern. I have a dehumidifier in my basement, where my storage is, but I can never be too careful.Then, when the weapons come out to play, they gets a quick shot of actual gun oil for the sake of lubricity. I've had good success with this over the years. Quote Link to comment Share on other sites More sharing options...
RebinPA Posted May 16, 2011 Report Share Posted May 16, 2011 A little bit of Syntec motor oil. Quote Link to comment Share on other sites More sharing options...
wwillson Posted May 16, 2011 Report Share Posted May 16, 2011 I'm a big fan of CorrosionX - see my thread. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.