Arkie_Lefty Posted February 7, 2010 Report Share Posted February 7, 2010 Cobbled this together a couple months back to take photos of 1911 handguns without laying them flat on their sides. Seen others made of wood with a carved upright basically the size of a mag that look real nice, but having a few old unreliable mags laying around and an assortment of scrap metal at work this seemed to be a quick and easy fix.Next project will be to build one with a hinge/pivot where mag attaches to base to allow angled shots.Bob Quote Link to comment Share on other sites More sharing options...
Tom Posted February 8, 2010 Report Share Posted February 8, 2010 I noticed that your photos had a nice stand in them. Thanks for sharing the secret! Quote Link to comment Share on other sites More sharing options...
wwillson Posted February 8, 2010 Report Share Posted February 8, 2010 Might work as a rack for storage if you put several side-by-side?? Wayne Quote Link to comment Share on other sites More sharing options...
Arkie_Lefty Posted February 8, 2010 Author Report Share Posted February 8, 2010 Saw that! In a internet pic of someone's office. Maybe Bill Wilson? Caspian Arms?Have to have one heck of a home security program before I'd ever feel comfortable going away for even a couple hours.Bob Quote Link to comment Share on other sites More sharing options...
RLH70 Posted February 9, 2010 Report Share Posted February 9, 2010 What are the specs on the welder Bob? Quote Link to comment Share on other sites More sharing options...
Arkie_Lefty Posted February 9, 2010 Author Report Share Posted February 9, 2010 What are the specs on the welder Bob? Well, I'm 56,5'11", overweight,arrogant,third time married, and been dobbing ferrous metals together for the past 42 years. The current MACHINE I'm using is a 215amp Lincoln mig. By far the best I've ever had the good fortune to own. Bob Quote Link to comment Share on other sites More sharing options...
RLH70 Posted February 9, 2010 Report Share Posted February 9, 2010 Well, I'm 56,5'11", overweight,arrogant,third time married, and been dobbing ferrous metals together for the past 42 years. The current MACHINE I'm using is a 215amp Lincoln mig. By far the best I've ever had the good fortune to own. Bob LOL, Left myself wide open for that one. I have a little Hobart 140 thats seen better days and have been thinking of going to a Lincoln with a little more umph like yours. Quote Link to comment Share on other sites More sharing options...
Arkie_Lefty Posted February 9, 2010 Author Report Share Posted February 9, 2010 Originally Posted By: Arkie_LeftyWell, I'm 56,5'11", overweight,arrogant,third time married, and been dobbing ferrous metals together for the past 42 years. The current MACHINE I'm using is a 215amp Lincoln mig. By far the best I've ever had the good fortune to own. Bob LOL, Left myself wide open for that one. I have a little Hobart 140 thats seen better days and have been thinking of going to a Lincoln with a little more umph like yours. Advice, worth what it costs. As I say I've been welding in a automotive/muffler shop for over 40 years. A mig is the finest machine imaginable when you are going to be doing basically the same procedure repeatedly. It must be set up for 1 basic function. In my case, .035 wire, CO2 gas, to weld 16ga. thru 3/8 mild steel. To rebuild dozer tracks, you need heavier wire, to patch a automotive fender you need much smaller. In a home shop an old-fashion stick machine (though reverse polarity and D.C. functions are nice!) is much more versatile, just by changing rod types/sizes.Bob Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.