wwillson Posted December 3, 2009 Report Posted December 3, 2009 Hornady recommends their "Hornady One Shot", but the Lock-n-Load AP doesn't ship with it. Is there anything else that's readily available that will substitute for Hornady One Shot to clean the rust inhibitor applied before shipping?Wayne Quote
Crashbox Posted December 3, 2009 Report Posted December 3, 2009 I used good ol' mineral spirits (highly refined) on my LNL AP and it seemed to work well. Of course, it doesn't act as a lube...I bought some stuff called TDL or "The Dry Lube" at Home Depot but I haven't tried it yet on my LNL AP- it was pretty inexpensive. Quote
rugerman1 Posted December 3, 2009 Report Posted December 3, 2009 Clean with acetone then run graphite thru the measure. Quote
Crashbox Posted December 4, 2009 Report Posted December 4, 2009 Clean with acetone then run graphite thru the measure. Will acetone adversely affect the powder drop chute if it's plastic? Quote
rugerman1 Posted December 4, 2009 Report Posted December 4, 2009 Originally Posted By: rugerman1Clean with acetone then run graphite thru the measure. Will acetone adversely affect the powder drop chute if it's plastic? I was addressing the metal parts of the measure itself,not the plastics.Yes,acetone will fubar most plastics I've ever been stupid enough to splash it on. Mark Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.